You company have 5 servers running window server 2012 (SRV-DCA, SRV-DC-B, SRV-DC-C, SVR-MBR-B and SVR-MBR-C). You are given a subnet 150.100.xx.0
(the value of xx is the same as above), mask 255.255.255.0. You are required to design and configure a network with active directory according to the following requirement:
At least two server computers must act as active directory domain controller for the techxx.com, to support the high volume of user for your company. Among them, one should be configured as Read Only Domain Controller which does not allow modification of the active directory database.
Your company opens two branches for two different locations. Two child domain controllers are needed for domains MEL.Techxx.com and SYD.Techxx.com.
Melbourne branch have more user and customer than Sydney branch. One more server is need for MEL.techxx.com domain, but it should be configured using Sever Core version as only basic finicalities are required on this computer
Questions to answer (as attachment)
Assignment Specific Requirements You are required implement the active directory according to the tasks specified above. You will prepare a documentation that provides the network design and describes the steps taken and the screenshots of the system. The description of steps does not need to be as detailed as in the lab manual, but it should provide enough information for reader to understand what you did to achieve the desired specification. Mark will be given to screenshot of the system and quality of the step description. You are suggested to use the VMware provided in the course to complete this assignment. If you chose to use your own laptop, it is your own responsibility to setup the necessary system for the Virtual Machines.
Submission Requirements
You are required to submit a word document containing Assignment Cover Sheet (provided on VU Collaborate) with your name and student ID, together with the screenshot and step description.
The content in the document may be compared with the actual implementation. Therefore, you are required to maintain the system after completing and submitting your assignment. You may be requested to present your implementation to verify your work. Assessment Criteria
Your assignment will be marked based on the functionality of the system after implementation and the quality of your documentation.
Penalty of 5% will be applied for each day late.
A sample of the Marking Scheme is provided in the next page.
